Clik here to view.
Turner desk mic, model identification request.
Can you please identify this microphone that I am considering for purchase, thank you. 73 Edit: I don't see a split key model in the catalog below.
View ArticleHOPING FOR THE BEST
My family and I are wishing all in Irma's path the best of luck. Our prayers are with you. Jojo 111 food stamp NJ.
View Articlecobra 29 questions.
hello everyone. stumbled across here looking for info and have some questions. I have a cobra 29 ltd classic se from oct 96. it was in a violent car crash and went on the shelf for 10 years. I got it...
View ArticleAnother cool widget you can't buy.
So, here's another cool widget you can't buy. Yet. So far all of this batch of converted Siltronix 80 and 90 with this display are spoken for. Before they're even ready. But I chafed because the window...
View ArticleAT-6666 vs Lincoln II+
Hey everyone, Been off the air a little over 10 years and thinking about returning. I've owned may different radio's in the past. I've been looking and reading about 2 radios but as all you know using...
View ArticleTALK ABOUT A TIME CAPSULE
Advertised as never used. I watched a few YouTube clips of this late 70's early 80's solid state transceiver, and it seems to be a solid performer. And yes it can be modified for 27 megahertz. Parts...
View ArticleWhat items cause resonating in cb or amp during modulation?
Just curious to know, when one talks into the mic but hears a slight resonating buzzing noise from CB or AMP or body what is causing this? Overdriving? Over modulation? Someone once mentioned it may be...
View ArticleCB Go Box Project
I decided to start a CB go box project. I would like a unit i could take camping away from my mobile but be able to make some contacts have some fun in the field. I know Go box's are big with the Ham...
View ArticlePossible Front End Overload
Hopefully this is the right spot for this... I've got a Magnum S9, love this radio, had it a very long time. The receive is very low on it now, don't know what happened. I've heard of front end...
View ArticleOld radio shack base antenna
I found in my stash (forgot i still have it) a bluish green 1/2 wave radio shack crossbow antenna. Does anyone know anything about it? IIRC the last time i tested it it had a mediocre match on 11...
View ArticleHurry-cains, and Helpers
Anyone been following the Harvey and Irma threads in the other forums? Seems to be lots of people (hams) wanting to help without the slightest idea of how to go about it properly. "I'll just load up...
View ArticlePar Electronics Antennas
I never see much discussion in these forums about Dale Parfitt and his antennas. http://www.parelectronics.com/index.php His Omniangles, HF Rectangles, Moxons, and his his new portable loop all look...
View ArticleMore CBers than Hams
When CB band is open with skip, about nothing heard on the 10 meter Ham band. Are there more CBers than hams now? I notice less than 1/2 the activity on the ham bands in the last 10 years.
View ArticleEPT360010a
I need a alignment manual for the EPT360010a, i can find 14 verision but not the 10a? Paul
View ArticleCan someone make my cb dream come true?
No matter how I try , the situation in unavoidable. I need a half decent antenna setup on my property, currently I use either a 11m dipole in attic ( HOA ) or the Wilson 1K magmount on my truck roof...
View ArticleAnyone have the 756 pro III?
I see that when I put the volume at 1 o'clock on a received signal, the audio starts distorting. Its not really that loud, but it starts cracking up. I use a external speaker with 2 6" and a tweeter...
View ArticlePalomar 350Z
I bought this amp and rebuilt it. New power supply capacitors & a relay to switch the 600 volt secondary. Palomar had the tubes drawing B+ continuously- not good. I had four new 6LF6, driver 6LF6...
View ArticleRecommend a Wattmeter
Since things are starting to come together here I'm looking to the future just a bit and figured a decent wattmeter inline behind my Emergency Use Only was probably a good idea. Setup is a Uniden...
View ArticleSuper Lynx by Pearce-Simpson
View attachment 21551 Found this at a local flea market. I had to dig it out of a pile of stuff. The top and sides are a little crusty but the face looks good. Plugged it in and it lit up. I had never...
View Article